KOATE WOOD VARNISH 2C

A COLOURLESS, PROTECTIVE VARNISH WITH HIGH RESISTANCE TO ABRASION AND WATER. GREAT FOR HOME AND COMMERCIAL USE.

Wood Varnish 2C is a versatile interior varnish that offers a refined finish with great protection for most wood-types, including Valchromat surfaces.

Koate’s Wood Varnish 2C provides seamless results. Created with ease of application in mind, it has been designed to help irradicate overlapping from your finish. Its overlap-free formulation has been developed so you can simply apply with a roller, safe in the knowledge that it will not leave rolling stripes visible after. No more worrying about a patchy finish, or trying to buff yourself out of a corner. The finish is clean, clear and consistent, saving you time without costing you performance.

This ground-breaking waterborne product is made up of a duo of components, providing you with a great look and increased wear. Koate’s Wood Varnish 2C is enriched by polyurethane helping to ensure high-resistance to abrasion and water.

This has been to designed to work in harmony with Koate's One Coat Wood Oil so you can customise and colour your finish.

Available in a range of sheens: Satin, Matt and X-Matt, it is easy to find the ideal finish.

AREAS OF USE

Interior Only: Interior furniture, doors, window frames, parquet, panelling, table tops, kitchens, stairs and balustrades, Valchromat, etc.

PREPARATION

• The substrate must be dry, free of dust, dirt and grease. Clean the surface with clean Koate soap and remove all dust from the surface with a dusting brush.
• Add 20% of the B Component to Wood Varnish 2C A Component and stir well but MANUALLY before use. Example:1L of A Component + 200ml of B Component

Tips: As the pot-life is strongly reduced when mixed, it is strongly recommended to mix small quantities. This mixture must be processed within 20 minutes.

APPLICATION

By Hand:

• Apply the first thin coat of Wood Varnish 2C by roller (short microfibre roller) or brush.
• Leave to dry for 12 hours.
• Apply the second thin coat of Wood Varnish 2C by roller (short microfibre roller) or brush.
   

No sanding between the first and second coat is needed. Should a third coat be used, then a light sanding between the second and third coat with an 240 grit abrasive or a scotch pad is advised.

• Technical Data Sheet